Automatic Protection Switches (APS)

DS1 and E1 Applications 5702 DS1 RouteSwitch™ 5703 E1 RouteSwitch™

CXR Larus offers a selection of Automatic Protection Switch (APS) products. When applied at each end of a DS1 or E1 facility, the APS selects the normal working facility for traffic or transfers traffic to/from a protection facility.

Download White Paper: ."Adding Simple Network Management Protocol (SNMP) Capability to the CXR Larus 5702/5703 RouteSwitch products"

5702 DS1 RouteSwitch™ (Single Ended, 1+1 protection)

The CXR Larus Model 5702 RouteSwitch™ is a DS1 automatic protection single ended switch that provides cost-effective, self-healing network capabilities in the event of cable cuts, electronic failures, or node failures. Compatible with the AT&T DDM-1000* and DDM-2000* Multiplexers, the RouteSwitch ensures consistently high quality received DS1 signal. This APS is especially suitable in SONET and microwave radio ring networks.

There are two versions of the 5702 circuit pack available. The 5702-1A unit does not switch on AIS received on the Facility (Network) side, while the 5702-1B unit does.

The card modules fit into CXR Larus Model 5702-3 (19/23 inch) 12 slot shelf, or the 5702-11 Remote shelf, which holds 2 cards. There are also ordering options for Remote Terminals which are complete with circuit packs for ease of customer ordering.

* Registered Trademark of AT&T

Ordering Information:
5702-1A RouteSwitch circuit pack module, No switch on Facility AIS, DS1
5702-1B RouteSwitch circuit pack module, Switch on Facility AIS, DS1
5702-2A RouteSwitch Remote System, complete with 2 ea. 5702-1A circuit packs
5702-2B RouteSwitch Remote System, complete with 2 ea. 5702-1B circuit packs
5702-3A Mounting Shelf, 12 slot, 19/23 inch
5702-11 Remote Shelf, 2 slot

	Get 5702 datasheet

.. ..

5703 E1 RouteSwitch™ (Single Ended, 1+1 protection)

The CXR Larus 5703 E1 RouteSwitch™ is a 1+1 E1 automatic protection single ended switch that provides cost-effective, self-healing network capabilities in the event of cable cuts, electronic failures, or node failures. Compatible with different E1 frame formats, the 5703 RouteSwitch is switch selected for the proper frame format and coding. The system accepts both AMI and HDB3 line coding. The card modules fit into the CXR Larus Model 5702-3 (19/23 inch) 12 slot shelves, or the Model 5702-11 Remote shelf, which holds two cards.

Ordering Information:
5703-0 RouteSwitch circuit pack module, E1
5702-3A Mounting Shelf, 12 slot, 19/23 inch
5702-11 Remote Shelf, 2 slot

	Get 5703 datasheet

.. ..